The XMK series bits are non-sealed Roller Bearing bits that are cooled and cleaned by airwith fast drilling speed and good strength which are used for the development of open-pit coalmines,iron mines,and non-ferrous metal mines
The thrust bearing is made of materials with high wear resistance, high hardness, and hightemperature resistance to improve its load-bearing capacity.
The air-cooling system can improve the air circulation conditions in the bearing cavity andreduce the temperature inside the bearing cavity.
The cutting structure adopts circular arc hard alloy ball teeth to improve compressive strengthand wear resistance and reduce tooth breakage rate.
The palm back is equipped with hard alloy teeth and welded with wear-resistant alloy toreduce wear on the palm back and extend bearing life.
Drill Bit Size | Drill Bit Type | |
in | mm | |
5 7/8 | 149.23 | XMK532、XMK542、XMK612、XMK632、XMK642、XMK712、XMK722、XMK742、XMK832 |
6 1/4 | 158.75 | XMK532、XMK542、XMK612、XMK632、XMK642、XMK712、XMK722、XMK742、XMK832 |
6 3/4 | 171.45 | XMK532、XMK542、XMK612、XMK632、XMK642、XMK712、XMK722、XMK742、XMK832 |
7 7/8 | 200 | XMK532、XMK542、XMK612、XMK632、XMK642、XMK712、XMK722、XMK742、XMK832 |
8 1/2 | 215.90 | XMK532、XMK542、XMK612、XMK632、XMK642、XMK712、XMK722、XMK742、XMK832 |
8 3/4 | 222.25 | XMK532、XMK542、XMK612、XMK632、XMK642、XMK712、XMK722、XMK742、XMK832 |
9 | 228.6 | XMK532、XMK542、XMK612、XMK632、XMK642、XMK712、XMK722、XMK742、XMK832 |
9 7/8 | 250.825 | XMK532、XMK542、XMK612、XMK632、XMK642、XMK712、XMK722、XMK742、XMK832 |
11 | 279.4 | XMK532、XMK542、XMK612、XMK632、XMK642、XMK712、XMK722、XMK742、XMK832 |
12 1/4 | 311.15 | XMK532、XMK542、XMK612、XMK632、XMK642、XMK712、XMK722、XMK742、XMK832 |
13 3/4 | 349.25 | XMK532、XMK542、XMK612、XMK632、XMK642、XMK712、XMK722、XMK742、XMK832 |
Note: The size and model of drill bits not shown in the table are designed according to user needs.